TDtelecom Technologies Development Ltd. -

TDtelecom Technologies Development Ltd.

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

connector and jumper
Specification: As per requirement
Detail: Connector series Jumper series Description: 1) NM-2m-NM Standard jumper 2) 7/16M-2m-7/16F Standard jumper 3) 7/16M-3m-7/16F Standard jumper 4) 7/16M-2m-NM Flexible jumper 5) NM-3m-7/16F Flexible jumper 6) 7/16M-3m-7/16...

waveguide components
Specification: As per requirement
Detail: Straight Sections of Rectangular Waveguide are useful for field and laboratory applications where lowest loss and VSWR are required. The waveguide conforms to MIL-W-85. Straight Sections can be supplied up to 12 feet long. ...

amplifier
Specification: As per requirement
Detail: Frequency range: 1900~1920MHz Gain: 23-27dB(forward)/21-25dB(backward) Input electrical level range: -5~10dBm(forward)

zadai and copper
Specification: As per requirement
Detail: Zadai series Description (types): (1) White Nylon Zadai 3 x 100mm (2) Black Nylon Zadai 3 x 100mm (3) White Nylon Zadai 3 x 150mm (4) Black Nylon Zadai 3 x 150mm (5) White Nylon Zadai 5 x 300mm (6) Black Nylon Zadai 5 x...

attenuators
Specification: As per requirement
Detail: Attenuator SMA and N Series Attenuator with Power Capacity of 1 to 50W Key Specifications/Special Features: 1. Coaxial type 2. SMA and N series 3. Wide frequency pass band (DC to 5GHz) 4. High attenuation accuracy 5....

directional coupler
Specification: As per requirement
Detail: Directional Coupler: DT-10-2 Directional Coupler for In-building Coverage and Communication Systems Key Specifications/Special Features: Freq: 0.8-2.2GHz Directivity (dB): >18 Coupling (dB): 10+/-1.0 Insertion lo...

jumper/cable ladder
Specification: As per requirement
Detail: Description: 1)NM-2m-NM Standard jumper 2)7/16M-2m-7/16F Standard jumper 3)7/16M-3m-7/16F Standard jumper 4)7/16M-2m-NM Flexible jumper 5)NM-3m-7/16F Flexible jumper 6)7/16M-3m-7/16F Flexible jumper 7)7/1...

cable entry
Specification: As per requirement
Detail: The cable Entry, which is used for the waterproof when feeder enters the machine room, is composed of entrance wall/roof feed through plate and cable entry boot. It has good airproof and easy installation features.

duplexer
Specification: As per requirement
Detail: Power Handling: 100 watts Operating Temperature: -30 to +75 degress Storage Temperature: -40 to +85 degress Operating Humidity: 0 to 90%, relative Dimension: 12a 4x62x28mm Connectors: SMA/N Technical Specifications: ...

power splitter /power divider
Specification: As per requirement
Detail: Power dividers are passive devices that are designed to combine multiple antennas in stacked antenna systems, while providing a constant 50 ohm impedance over the bandwidth chosen. The advantages of this system are wider b...


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1